2020-10-09 603
Increase the safety of workers. In some harsh industrial environment, it is very dangerous for workers to carry out work in person. On site machines and sharp objects are easy to hurt people. Workers working in some high temperature, dust and toxic environment will always be in danger. So, it is enough to use robots instead of human in these environments. With the improvement of people's living standards, people are more reluctant to engage in these dangerous operations. The use of robot technol
2020-10-09 604
With the transformation and upgrading of the manufacturing industry and the development of electronic manufacturing industry, collaborative robots have become a hot topic. Do you think that collaborative robots are just robots without security fences? That's a big mistake. Let's clear up the misunderstanding. The definition of a cooperative robot refers to a robot that can interact with people directly in the cooperation area. The cooperation area is the area where the robot and human can work t
2020-10-09 596
In fact, there are many similarities between the robot industry and the computer industry. At first, computers were mainly used in scientific research institutions and large companies. It was not until the advent of microprocessors and a relatively simple basic programming environment in the 1970s. In addition, the cost of the whole machine dropped sharply, and the personal computer slowly entered the stage of history. But now the cooperative robot is similar to the personal computer which just
2020-10-09 642
Industrial robot has become an indispensable part in modern industrial production. Good protection and maintenance of industrial robots will extend the service life of robots and reduce the probability of failure. It will also help the stable operation of production lines. About the daily maintenance of industrial robots, we have a simple understanding: 1. Before general protection and maintenance, it is necessary to check the brake of each axis motor before operation, run each axis to the load
2020-10-09 537
Zhongshan Industrial Robot general maintenance 1. The base and arm of the manipulator should be cleaned regularly. Use solvent with care. Strong solvents such as acetone should be avoided. High pressure cleaning equipment can be used, but direct injection to the manipulator should be prevented. If the manipulator has grease film maintenance, remove it as required. In order to prevent the generation of static electricity, it is necessary to use a wet or damp cloth to wipe the non-conductive surfa